191
edits
Changes
Jump to navigation
Jump to search
Line 27:
Line 27: − + − + + + +
no edit summary
#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.
#If making a bend for a box or a pan, adjust the fingers so that the equivalent width of the fingers is just shorter than your sheet metal.
#Adjust the clamp handle to allow room to insert your work piece.
#Adjust the clamp handle to allow room to insert your work piece.
#Insert your work piece to the line you want to bend, and clamp your piece securely.
#Insert your work piece to the line you want to bend, centered in the brake, and clamp your piece securely.
#
#
== Safety ==
== Safety ==
#Always make sure your hands are out of the way of the
#Always make sure your hands are out of the way of the fingers and all moving parts.
#Be aware of your surroundings to ensure that you do not bump others with the counterweight.
#If bending a small piece of metal, place it in the center of the brake. (If you don't it can damage the machine)
#You may not use the sheet metal machines without safety glasses!! (Should be obvious if you are following the rules of the shop)
== Documentation ==
== Documentation ==