Difference between revisions of "Belt/Disc Sander"

From maker-hub
Jump to navigation Jump to search
Line 71: Line 71:
 
====General maintenance====
 
====General maintenance====
  
Insert text
+
The following items need to be periodically lubricated:
 +
* Idler slide (use non hardening grease)
 +
*Table trunnion (use non hardening grease)
  
 
====Specific Maintenance Tasks====
 
====Specific Maintenance Tasks====

Revision as of 17:00, 21 October 2019

Disc Belt Sander.png
Belt and Disc Sander

Make: PowerMatic

Model: BD31A

Ace: Needed (Makerhub@georgefox.edu).

Location: Wood Shop

Description

The belt/disc sander allows you to quickly remove material.

Here is an example of this piece of equipment being used.

Insert video media here.

Documentation

Terminology

Insert terminology here

User Manual

Training

Overview

Insert Text

Demonstration

You will need to demonstrate the safe setup and use of the belt/disc sander.

General Procedure

Insert text

Safety

  • Sanding creates heat due to the friction. Be careful not to burn your fingers.
  • Never put your hand in a position that slipping could cause you to make contact with the belt or disc.
  • Never reach over the machine.
  • Use a brush when clearing sawdust from the tables, not your hands.
  • Use light pressure when removing material. Never try to force feed the machine.
  • Avoid kickbacks by sanding on the correct side of the disc. Do not sand on the right hand portion of the disc.

Certification

Foxtale Course

Troubleshooting

Maintenance

General maintenance

The following items need to be periodically lubricated:

  • Idler slide (use non hardening grease)
  • Table trunnion (use non hardening grease)

Specific Maintenance Tasks

Maintenance Procedure Frequency Done By
Replace sanding Belt/Pad As Needed Ace/Tech