Belt/Disc Sander

Belt and Disc Sander

Make: PowerMatic

Model: BD31A

Ace: Needed (Makerhub@georgefox.edu).

Location: Wood Shop

Description

Insert Description Text

Here is an example of this piece of equipment being used.

Insert video media here.

Documentation

Terminology

Insert terminology here

User Manual

Training

Overview

Insert Text

Demonstration

Insert text

General Procedure

Insert text

Safety

• Sanding creates heat due to the friction. Be careful not to burn your fingers.
• Never put your hand in a position that slipping could cause you to make contact with the belt or disc.
• Never reach over the machine.
• Use a brush when clearing sawdust from the tables, not your hands.
• Use light pressure when removing material. Never try to force feed the machine.
• Avoid kickbacks by sanding on the correct side of the disc. Do not sand on the right hand portion of the disc.

Certification

Foxtale Course

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Replace sanding Belt/Pad	As Needed	Ace/Tech