PCB Lab

The Prototype Lab

The Printed Circuit Board lab will contain an electronics station (as in the Hub) with the Metcal soldering station and microscope. It will also contain a Voltera V-One PCB Printer (which can print Gerber files onto a board, and can also print solder paste onto normally fabricated boards), a manual pick-and-place machine, and a reflow oven.

The current Ace of the PCB Lab is Warren Milligan (wmilligan21@georgefox.edu, ?) ().

And this is a test edit.

Schedule

View the most up-to-date PCB Lab schedule on this Google Sheet.

Equipment Overview

Name	Company	Model	Current Ace	Ace Contact
PCB Printer	Voltera	V-One	Isaac Beals (ibeals16@georgefox.edu, ?)
Pick and Place	LPKF	Protoplace S	Isaac Beals (ibeals16@georgefox.edu, ?)
Reflow Oven	LPKF	ProtoFlow S N2	Isaac Beals (ibeals16@georgefox.edu, ?)
Rework Station	Zephyrtronics	ZT-2, ZT-3, ZT-1-CLS-DPU, Hakko FR-301, Quick861DW	Isaac Beals (ibeals16@georgefox.edu, ?)
Soldering Irons	Weller	WES51	Needed (Makerhub@georgefox.edu, ?)
Through Hole Press	Bungard	PL-FAVORIT	Isaac Beals (ibeals16@georgefox.edu, ?)

Equipment by Icon

• 

  PCB Printer

• 

  Pick and Place

• 

  Reflow Oven

• 

  Rework Station

• 

  Soldering Irons

• 

  Through Hole Press

Organization

The PCB Lab has a Brother PT-Touch P750W Brother PT-Touch P750W label maker for labeling items. To use it:

1. Download the iOS App or the Android App.
2. Ensure the label maker is powered on.
3. Within the app, select the gear to open settings.
4. Select "Printer."
5. Select "Set Manually."
6. Enter the IP Address of "10.90.12.19" without the quotes.
7. Select "Connect."
8. Select "Check Media." This will get the correct size of the tape that is currently in the label maker. You should click this button often, especially when you change the tape in the label maker or start a new session of label printing.
9. Select "Done" at the top right.

You can now print labels for labeling things in the PCB Lab.

3 commandments

Jake Whipple (jwhipple15@georgefox.edu, 503555555)