45
edits
Changes
Jump to navigation
Jump to search
→Specific Maintenance Tasks: Added last time maintenance was performed, removed cleaning with isopropyl as this is no longer considered best practice
Line 247:
Line 247:
|
−|-
−|Refrigerating the Dispensers
−|Whenever they are not in use
−|Student
−|N/A
−|-
−|Switch Cleaning
−|During Calibration stage using Isopropyl Alcohol and a giant Q-tip
−|Student
|General Cleaning
|General Cleaning
|Before and after each use, including ink/solder residue and drilled material
|Before and after each use, including ink/solder residue and drilled material
+|Student
+|N/A
+|-
+|Refrigerating the Dispensers
+|Whenever they are not in use
|Student
|Student
|N/A
|N/A
Line 258:
Line 263:
|When the nozzle is clogged
|When the nozzle is clogged
|Student or Ace
|Student or Ace
−|
|
|-
|-
Line 273:
Line 268:
|Whenever out of ink/solder paste
|Whenever out of ink/solder paste
|Ace
|Ace
−|
+| 01/27/2022 by MM
|-
|-
|Labeling dispenser with lot name
|Labeling dispenser with lot name
|Whenever ink/solder paste is replaced
|Whenever ink/solder paste is replaced
|Ace
|Ace
−|
+| 01/27/2022 by MM
|-
|-
|Cleaning calibration switch linear hardware (Disassemble, clean, oil)
|Cleaning calibration switch linear hardware (Disassemble, clean, oil)
|Once yearly, or as required.
|Once yearly, or as required.
|Ace and Technician
|Ace and Technician
−|
+| 01/27/2022 by MM
|}
|}