Changes

<strong>Step 23:</strong> In the Prototype Lab, open your .stl file in [[PrusaSlicer]]. You should look for the following icon.

<strong>Step 23:</strong> In the Prototype Lab, open your .stl file in [[PrusaSlicer]]. You should look for the following icon.

[[File:PrusaSlicer Icon.png|150px|none|PrusaSlicer Icon]]

[[File:PrusaSlicer Icon.png|150px|none|thumb|PrusaSlicer Icon]]

<br>

<br>

<br>

<br>

<strong>Step 24:</strong> When a .stl file is loaded in PrusaSlicer, the software doesn't always get the orientation of the object correct (as in the first screenshot below). You may need to rotate your egg in order to put it in the correct orientation for 3D printing. You can use either the Rotate function or the Place on face function; both are located in the left-hand toolbar. Rotate the egg to ensure that the bottom of the egg is on the build plate.

<strong>Step 24:</strong> When a .stl file is loaded in PrusaSlicer, the software doesn't always get the orientation of the object correct (as in the first screenshot below). You may need to rotate your egg in order to put it in the correct orientation for 3D printing. You can use either the Rotate function or the Place on face function; both are located in the left-hand toolbar. Rotate the egg to ensure that the bottom of the egg is on the build plate.

2

[[File:Egg 24.2.png|1500px|none]]

<br>

<br>

<br>

<br>