80
edits
Changes
Jump to navigation
Jump to search
Line 131:
Line 131: +
→Final Steps
# Use the Preview Toolpaths feature to double check your part. Make sure that any inner geometry is cut first. You may need to use the reset preview option.
# Use the Preview Toolpaths feature to double check your part. Make sure that any inner geometry is cut first. You may need to use the reset preview option.
# Briefly look through your material set up, tool selections, and settings to be certain that you have correctly programmed the machine.
# Briefly look through your material set up, tool selections, and settings to be certain that you have correctly programmed the machine.
# Check (again) that the z zero position has been set to Machine Bed.
# Select Save Toolpath. Be sure that the "Output all visible toolpaths to one file" box is selected. Check that all of your toolpaths appear underneath "Toolpaths to be saved..." The tools should have the correct tool size and location indicated. Select the appropriate post processor: Laguna SmartShop BR ATC (inch) (*.prg).
# Select Save Toolpath. Be sure that the "Output all visible toolpaths to one file" box is selected. Check that all of your toolpaths appear underneath "Toolpaths to be saved..." The tools should have the correct tool size and location indicated. Select the appropriate post processor: Laguna SmartShop BR ATC (inch) (*.prg).