Changes

*There are often sharp edges left on the material from the cutting process. Be careful handling a fresh cut piece and use the deburring tools to remove any sharp edges.  

*There are often sharp edges left on the material from the cutting process. Be careful handling a fresh cut piece and use the deburring tools to remove any sharp edges.  

*On a similar note a fresh cut piece is usually hot so check the temperature with the back of your hand before picking it up.

*On a similar note a fresh cut piece is usually hot so check the temperature with the back of your hand before picking it up.

*Regular operation can start fires! Be wary.

*Make sure to use tabs to prevent collision damage with the cutting head.  

*Before opening any covers, turn off the machine to make sure no cutting operations will happen while you are handling the inside the the laser cutter. Be safe kids.

*Before opening any covers, turn off the machine power and remove the key to make sure no cutting operations will happen while you are working inside the the laser cutter.

==Certification==

==Certification==