53
edits
Changes
Jump to navigation
Jump to search
mLine 22:
Line 22: − + − ** Mold cannot be concave and must slant outwards slightly or it will not be removable from the plastic. + − + − + − + − + − + − +
no edit summary
== Operation ==
== Operation ==
* Place a mold into the tray and lower it
* Place a mold into the tray and lower it.
* Mold cannot be concave and must slant outwards slightly or it will not be removable from the plastic.
* Place plastic into the clamps ensuring it completely covers the white seals
* Place plastic into the clamps ensuring it completely covers the white seals.
* Turn on the heaters. They should take about 15 minutes to warm up.
* Turn on the heaters. They should take about 15 minutes to warm up.
* Lift the table
* Lift the table.
* Turn on the vacuum
* Turn on the vacuum.
* Let the plastic cool, then hit the release button
* Let the plastic cool, then hit the release button.
* Lower the table to remove the plastic
* Lower the table to remove the plastic.
* Reset the table
* Reset the table.
== Specifications for Molds ==
== Specifications for Molds ==