Changes

====Demonstration====

====Demonstration====

To show a complete knowledge of the Wood Drill Press, students will demonstrate that theycan set up everything, and drill a through hole and a blind hole.  

To show a complete knowledge of the Wood Drill Press, students will demonstrate that they can set up everything, and drill a through hole and a blind hole.  

====General Procedure====

====General Procedure====

# Make sure you are wearing proper machine shop attire. (Safety glasses, rolled up or short sleeves, and closed toed shoes.)

# Make sure you are wearing proper machine shop attire. (Safety glasses, rolled up or short sleeves, and closed toed shoes.)

# Make sure whenever making adjustments to your workpiece that the Drill Press is turned off.  

# Make sure whenever making adjustments to your work piece that the Drill Press is turned off.  

# Mark your piece where the hole should be drilled, then use a hole starter to punch a hole for the drill bit.  

# Mark your piece where the hole should be drilled, then use a hole starter to punch a hole for the drill bit.  

# Put the appropriate drill bit into the chuck and use the chuck key on the drill press to tighten it. Make sure you tighten all three sides of the chuck. Chuck key on left, Chuck on right.[[File:...chuck.png|none|thumb]]

# Put the appropriate drill bit into the chuck and use the chuck key on the drill press to tighten it. Make sure you tighten all three sides of the chuck. Chuck key on left, Chuck on right.[[File:...chuck.png|none|thumb]]

#### Set handle fully back down in place on screw  

#### Set handle fully back down in place on screw  

#### Tighten further until snug and quill is locked in place

#### Tighten further until snug and quill is locked in place

# Line piece up with drill bit and fasten down onto work table using a clamp or vice.          (If drilling a through hole, use a piece of FLAT scrap wood under to avoid blowout.)

# Line piece up with drill bit and fasten down onto work table using a clamp or vice. If drilling a through hole, put a piece of FLAT scrap wood under the piece being drilled to avoid a blowout.  

# Turn safety lock off on drill press located on the right side of the machine. As seen in the picture below off to the right. Safety lock in read and yellow on right of picture.[[File:...voyagerthing.png|none|thumb]]

# Turn safety lock off on drill press located on the right side of the machine. As seen in the picture below off to the right. Safety lock in read and yellow on right of picture.[[File:...voyagerthing.png|none|thumb]]

# Now the display screen should be on. Using the buttons adjust the speed to the specific speed needed to cut the materials.  

# Now the display screen should be on. Using the buttons adjust the speed to the specific speed needed to cut the materials.  

* [https://www.teknatool.com/product/nova-voyager-dvr-variable-speed-drill-press-exclusive-amazon-bundle/?gclid=EAIaIQobChMI4PzDxsni2wIVFNNkCh3lBAcLEAAYASAAEgL5NvD_BwE Product Home Page]

* [https://www.teknatool.com/product/nova-voyager-dvr-variable-speed-drill-press-exclusive-amazon-bundle/?gclid=EAIaIQobChMI4PzDxsni2wIVFNNkCh3lBAcLEAAYASAAEgL5NvD_BwE Product Home Page]

* <figure-inline class="mw-default-size"><figure-inline><figure-inline>[[File:wood_drill_press_operation_manual|220x220px]]</figure-inline></figure-inline></figure-inline>

* <figure-inline class="mw-default-size"><figure-inline><figure-inline><figure-inline>[[File:wood_drill_press_operation_manual|220x220px]]</figure-inline></figure-inline></figure-inline></figure-inline>

* [https://www.youtube.com/watch?v=6PvDExhAOC8 First look]

* [https://www.youtube.com/watch?v=6PvDExhAOC8 First look]

== Training ==

== Training ==

* <figure-inline class="mw-default-size"><figure-inline><figure-inline>[[File:wood_drill_press_operation_manual|220x220px]]</figure-inline></figure-inline></figure-inline>

* <figure-inline class="mw-default-size"><figure-inline><figure-inline><figure-inline>[[File:wood_drill_press_operation_manual|220x220px]]</figure-inline></figure-inline></figure-inline></figure-inline>

<br /><br /><br /><br /><br />

<br /><br /><br /><br /><br />