473
edits
Changes
Jump to navigation
Jump to search
Line 73:
Line 73: − + + + + + +
no edit summary
# Hit the green button to begin the cut. The cut is indicated by a blue line and the center if the bit is indicated by a white dot. The router can move the bit anywhere within the larger white circle so make sure to keep the cut line within the large circle and the router will take care of the rest.. There is also an auto advance feature that will move the bit forward to the edge of the large circle.
# Hit the green button to begin the cut. The cut is indicated by a blue line and the center if the bit is indicated by a white dot. The router can move the bit anywhere within the larger white circle so make sure to keep the cut line within the large circle and the router will take care of the rest.. There is also an auto advance feature that will move the bit forward to the edge of the large circle.
# Run through your air cut until you get a feel for how the router responds and are confident the cut file is correct.
# Run through your air cut until you get a feel for how the router responds and are confident the cut file is correct.
#
# Change from an air cut to a whatever cut depth you desire. A good rule of thumb is to never cut deeper than 1.5 times the diameter of the cutting tool.
# Make sure the spindle motor is plugged in and the correct bit is selected.
# Press the z touch button on the left of the screen to zero the router bit to the surface of the work piece.
# Set the spindle speed. The spindle speed also be adjusted using the dial on the side of the spindle motor if needed.
# Hit the green button on the handle or press start on the screen to perform the cut.
# Reset the space when finished by vacuuming any dusk, returning the router to its box and putting away any scrap material.
==Safety==
==Safety==
*
*