Changes

{{#evu:https://www.youtube.com/watch?v=DekAjAOIVvQ}}

{{#evu:https://www.youtube.com/watch?v=DekAjAOIVvQ}}

# Select the air cut type in the upper left of the screen and move the router over top of your first cut line so that the line is highlighted as moving dashed line. This indicates the direction your cut should be made in. Make sure to select your bit size and cut location at this point. The cut location can be on the line, inside the line, or outside the line based on your application.  

# Select the air cut type in the upper left of the screen and move the router over top of your first cut line so that the line is highlighted as moving dashed line. This indicates the direction your cut should be made in. Make sure to select your bit size and cut location at this point. The cut location can be on the line, inside the line, or outside the line based on your application.  

# Hit the green button to begin the cut. The cut is indicated by a blue line and the center if the bit is indicated by a white dot. The router can move the bit anywhere within the larger white circle so make sure to keep the cut line within it at all times. There is also an auto adva

# Hit the green button to begin the cut. The cut is indicated by a blue line and the center if the bit is indicated by a white dot. The router can move the bit anywhere within the larger white circle so make sure to keep the cut line within the large circle and the router will take care of the rest.. There is also an auto advance feature that will move the bit forward to the edge of the large circle.

 

==Safety==

==Safety==

*  

*