473
edits
Changes
Jump to navigation
Jump to search
Line 54:
Line 54: − + + + + +
no edit summary
# Once the heating element is installed you will want to adjust the pressure applied to the mug using the four large pressure adjustment knobs. The pressure should be evenly distributed across the mugs's surface and firm without risk of crushing it.
# Once the heating element is installed you will want to adjust the pressure applied to the mug using the four large pressure adjustment knobs. The pressure should be evenly distributed across the mugs's surface and firm without risk of crushing it.
# Adjust the time and temperature. 305 °F for 15 seconds is recommended as a starting point but feel free to try new things to improve the results. See the image below for details on changing the time and temp. [[File:Mug press temp.png|none|thumb|799x799px]]
# Adjust the time and temperature. 305 °F for 15 seconds is recommended as a starting point but feel free to try new things to improve the results. See the image below for details on changing the time and temp. [[File:Mug press temp.png|none|thumb|799x799px]]
#
# Place the graphic onto the mug. Tape may be helpful so that the graphic does not shift after it is placed into the press..
# Put the mug into the press and clamp down. If a plastic transfer paper is being used make sure to wrap the entire mug in one of the Teflon sheets found in the t shirt heat press to prevent the transfer paper from melting to the heating element. The timer will beep once the transfer is complete.
# Remove the mug from the press and wait about 30 seconds before removing the transfer paper.
# Reset the space by turning off the machine, throwing away any scraps and wiping any debris off the machine.
==Safety==
==Safety==
* Things are muy calinte.
* Things are muy calinte.
* Do n
==Certification==
==Certification==