479
edits
Changes
Jump to navigation
Jump to search
Line 34:
Line 34: − − LCD Display[[File:bake_ink_selection.jpg|300x300px|none|link=https://maker-hub.georgefox.edu/wiki/File:Bake_ink_selection.jpg]]Tray[[File:bake_go.jpg|300x300px|none|link=https://maker-hub.georgefox.edu/wiki/File:Bake_go.jpg]] Line 43:
Line 41: − Insert Text+ − Insert text+ − + + − + − + − Insert text
no edit summary
File:bake_go.jpg|Tray
File:bake_go.jpg|Tray
</gallery>
</gallery>
* [https://www.lpkfusa.com/products/pcb_prototyping/smt_assembling/protoflow_s/ Product Home Page]
* [https://www.lpkfusa.com/products/pcb_prototyping/smt_assembling/protoflow_s/ Product Home Page]
====Overview====
====Overview====
The Reflow Oven bakes PCBs to harden the traces and pads where components are laid. It's just like your oven at home with a few extra accessories, like preset profiles that adjust the temperature and time based on the ink/paste you put on your board.
====Demonstration====
====Demonstration====
To show a complete knowledge of the oven, the student will have a PCB prepared by the PCB Printer and follow the instructions in the General Procedure.
====General Procedure====
====General Procedure====
# Power the Reflow Oven on.
# Power the Reflow Oven on.
# Select the respective ink/paste. Recall, Green is V1 Ink, Orange is V1 Paste, and Blue is Sn63Pb37.
# Select the respective ink/paste on the LCD Display. Recall, Green is V1 Ink, Orange is V1 Paste, and Blue is Sn63Pb37.[[File:bake_ink_selection.jpg|300x300px|none|link=https://maker-hub.georgefox.edu/wiki/File:Bake_ink_selection.jpg]]
# The oven will warm up. When its ready, press "Enter" to open the tray.
# The oven will warm up. When its ready, press "Enter" to open the tray.
# '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails.
# '''DANGER: The rails could be HOT! Take caution.''' Place the board securely on the rails.[[File:bake_place.jpg|300x300px|none|link=https://maker-hub.georgefox.edu/wiki/File:Bake_place.jpg]]
# Press "Enter" to close the tray.
# Press "Enter" to close the tray.
# The preheat will take 2 minutes. The baking process takes about 30 minutes for traces and 3 minutes for the paste..
# The preheat will take 2 minutes. The baking process takes about 30 minutes for traces and 3 minutes for the paste.
# The drawer will automatically open to initiate the cool down phase. '''DO NOT remove the board until the oven says all the stages are complete. DANGER: The rails are HOT!'''
# The drawer will automatically open to initiate the cool down phase. '''DO NOT remove the board until the oven says all the stages are complete. DANGER: The rails are HOT!'''
# When cool down is complete, remove the board from the oven, and turn off the oven.
# When cool down is complete, remove the board from the oven, and turn off the oven.
==Safety==
==Safety==