Changes

## Click "Next." <br /><br />

## Click "Next." <br /><br />

# ''Top Layer Print''

# ''Top Layer Print''

## The Voltera will print what is selected in green. Below is an example of a portion of the board selection. Ensure the portion you want to print is selected (in this case, select everything.) Remember that blue lines will not be printed. [[File:voltera_selection.PNG|300x300px|none]] <br />

## The Voltera will print what is selected in green. Below is an example of a portion of the board selected. Ensure the portion you want to print is selected (in this case, select everything.) Remember that blue lines will not be printed. [[File:voltera_selection.PNG|300x300px|none]] <br />

## Click "Start." Let the Voltera finish its process. If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Also shown below is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted [[File:voltera_printing.jpg|300x300px|none]] <br /> [[File:voltera_print_blob.jpg|300x300px|none]] <br /> [[File:voltera_print_redo.jpg|300x300px|none]] <br />

## Click "Start." Let the Voltera finish its process. If a portion of the print fails or is incorrect, you can stop mid-print, or wait until it is finished and redo that selection. Also shown below is an example of a portion of ink that globbed up. The portion was wiped and can be reprinted. [[File:voltera_printing.jpg|300x300px|none]] <br /> [[File:voltera_print_blob.jpg|300x300px|none]] <br /> [[File:voltera_print_redo.jpg|300x300px|none]] <br />

## Remove the conductor, replace the cap, '''and return the conductive ink to the fridge!'''

## Remove the conductor, replace the cap, '''and return the conductive ink to the fridge!'''

## When you reach the "Flip Board," you are done. Quit the Voltera application. <br /> <br />

## When you reach the "Flip Board," you are done. Quit the Voltera application. <br /> <br />