Changes

Jump to navigation Jump to search
Line 46: Line 46:     
=== Job Control & Laser Cutter ===
 
=== Job Control & Laser Cutter ===
 +
Always make sure the material you are using is safe to use. There is an especially high risk when engraving plastics. Fumes from plastics can be toxic. Make sure you find the specific material you are using and check to see if it produces toxic fumes when burned. Never attempt to engrave PVC as it produces mustard gas.
 +
 +
Also be aware that the laser cutter is only able to cut successfully through up to 1/4" of wood. It will also char the wood. If you want to engrave wood that is over 1/4" thick, that's perfectly fine. Just make sure that you come with a pre-cut shape to engrave upon or have a plan for cutting out your engraving after.
 +
 
Job Control lets you set up/create Material Profiles, change between the HoneyComb Table and the Rotary tool (mostly used for Hydroflasks), and choose a location to cut on your material.
 
Job Control lets you set up/create Material Profiles, change between the HoneyComb Table and the Rotary tool (mostly used for Hydroflasks), and choose a location to cut on your material.
  
142

edits

Navigation menu