Changes

Jump to navigation Jump to search
Line 40: Line 40:  
{{#evu:https://www.youtube.com/watch?v=9I1DpWAQKuA}}
 
{{#evu:https://www.youtube.com/watch?v=9I1DpWAQKuA}}
   −
== Documentation ==
+
==Documentation==
   −
==== Terminology ====
+
====Terminology====
 +
[[File:Heat Press Terminology .jpg|right|thumb|500x500px| '''Figure 1.''' Heat press and its terminology]]
 
* Platen  - The flat plates on the top and bottom of the machine which apply pressure to the material along with heat.  
 
* Platen  - The flat plates on the top and bottom of the machine which apply pressure to the material along with heat.  
 
* Pressure Adjustment Knob - The knob located over the center of the upper platen which is used to adjust the pressure applied to the material.
 
* Pressure Adjustment Knob - The knob located over the center of the upper platen which is used to adjust the pressure applied to the material.
Line 49: Line 50:  
* Material - The item onto which the graphic is transferred. In many cases this is a t-shirt.  
 
* Material - The item onto which the graphic is transferred. In many cases this is a t-shirt.  
 
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
 
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens. [[File:Heat Press Terminology .jpg|none|thumb|500x500px| '''Figure 1.''' Heat press and its terminology  ]]
+
* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens.  
   −
==== Manuals ====
+
====User Manual====
    
[[Media:Hotronix-MAXX-Digital-Clam-Press-Operators-Manual.pdf|Heat Press User Manual]]
 
[[Media:Hotronix-MAXX-Digital-Clam-Press-Operators-Manual.pdf|Heat Press User Manual]]

Navigation menu