2,418
edits
Changes
Jump to navigation
Jump to search
Line 40:
Line 40: − + − + + Line 49:
Line 50: − + − +
→Documentation
{{#evu:https://www.youtube.com/watch?v=9I1DpWAQKuA}}
{{#evu:https://www.youtube.com/watch?v=9I1DpWAQKuA}}
== Documentation ==
==Documentation==
==== Terminology ====
====Terminology====
[[File:Heat Press Terminology .jpg|right|thumb|500x500px| '''Figure 1.''' Heat press and its terminology]]
* Platen - The flat plates on the top and bottom of the machine which apply pressure to the material along with heat.
* Platen - The flat plates on the top and bottom of the machine which apply pressure to the material along with heat.
* Pressure Adjustment Knob - The knob located over the center of the upper platen which is used to adjust the pressure applied to the material.
* Pressure Adjustment Knob - The knob located over the center of the upper platen which is used to adjust the pressure applied to the material.
* Material - The item onto which the graphic is transferred. In many cases this is a t-shirt.
* Material - The item onto which the graphic is transferred. In many cases this is a t-shirt.
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.
* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens. [[File:Heat Press Terminology .jpg|none|thumb|500x500px| '''Figure 1.''' Heat press and its terminology ]]
* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens.
==== Manuals ====
====User Manual====
[[Media:Hotronix-MAXX-Digital-Clam-Press-Operators-Manual.pdf|Heat Press User Manual]]
[[Media:Hotronix-MAXX-Digital-Clam-Press-Operators-Manual.pdf|Heat Press User Manual]]