PCB Lab
The Printed Circuit Board lab will contain an electronics station (as in the Hub) with the Metcal soldering station and microscope. It will also contain a Voltera V-One PCB Printer (which can print Gerber files onto a board, and can also print solder paste onto normally fabricated boards), a manual pick-and-place machine, and a reflow oven.
The current Ace of the PCB Lab are Warren Milligan (wmilligan21@georgefox.edu).
Schedule
View the most up-to-date PCB Lab schedule on this Google Sheet.
Equipment Overview
| Name | Company | Model | Current Ace ⠉ | Ace Contact ⠉ |
|---|---|---|---|---|
| PCB Printer | Voltera | V-One | Isaac Beals | |
| Pick and Place | LPKF | Protoplace S | Isaac Beals | |
| Reflow Oven | LPKF | ProtoFlow S N2 | Isaac Beals | |
| Rework Station | Zephyrtronics | ZT-2, ZT-3, ZT-1-CLS-DPU, Hakko FR-301, Quick861DW | Isaac Beals | |
| Soldering Irons | Weller | WES51 | Needed | |
| Through Hole Press | Bungard | PL-FAVORIT | Isaac Beals |
Equipment by Icon
PCB Printer
Pick and Place
Reflow Oven
Rework Station
Soldering Irons
Through Hole Press
Organization
The PCB Lab has a Brother PT-Touch P750W Brother PT-Touch P750W label maker for labeling items. To use it:
- Download the iOS App or the Android App.
- Ensure the label maker is powered on.
- Within the app, select the gear to open settings.
- Select "Printer."
- Select "Set Manually."
- Enter the IP Address of "10.90.12.19" without the quotes.
- Select "Connect."
- Select "Check Media." This will get the correct size of the tape that is currently in the label maker. You should click this button often, especially when you change the tape in the label maker or start a new session of label printing.
- Select "Done" at the top right.
You can now print labels for labeling things in the PCB Lab.