PCB Lab
The Printed Circuit Board lab contains an electronics station (as in the Hub) with the Metcal soldering station and microscope. It also contains a Voltera V-One PCB Printer (which can print Gerber files onto a board, and can also print solder paste onto normally fabricated boards), a manual Pick-and-Place machine, a Reflow Oven, and a Reflow Station.
The current Ace of the PCB Lab is Warren Milligan (wmilligan21@georgefox.edu).
Schedule
View the most up-to-date PCB Lab schedule on this Google Sheet.
Equipment Overview
| Name | Company | Model | Current Ace ⠉ | Ace Contact ⠉ |
|---|---|---|---|---|
| PCB Printer | Voltera | V-One | Isaac Beals | ibeals16@georgefox.edu |
| Pick and Place | LPKF | Protoplace S | Isaac Beals | ibeals16@georgefox.edu |
| Reflow Oven | LPKF | ProtoFlow S N2 | Isaac Beals | ibeals16@georgefox.edu |
| Rework Station | Zephyrtronics | ZT-2, ZT-3, ZT-1-CLS-DPU, Hakko FR-301, Quick861DW | Isaac Beals | ibeals16@georgefox.edu |
| Soldering Irons | Weller | WES51 | Needed | Makerhub@georgefox.edu |
| Through Hole Press | Bungard | PL-FAVORIT | Isaac Beals | ibeals16@georgefox.edu |
Equipment by Icon
Organization
The PCB Lab has a Brother PT-Touch P750W Brother PT-Touch P750W label maker for labeling items. To use it:
- Download the iOS App or the Android App.
- Ensure the label maker is powered on.
- Within the app, select the gear to open settings.
- Select "Printer."
- Select "Set Manually."
- Enter the IP Address 10.90.12.19.
- Select "Connect."
- Select "Check Media." This will get the correct size of the tape that is currently in the label maker. You should click this button often, especially when you change the tape in the label maker or start a new session of label printing.
- Select "Done" at the top right.
You can now print labels for labeling things in the PCB Lab.
3 commandments
1. Safety First
Safety First is the rule we hold highest of the three. This rule applies to both the safety of you as well as others
Keeping yourself and others safe in the PCB Lab is very important, as there are possibilities for accidents if you don't follow the safety guidelines. Safety starts with you so don't depend on others to keep you safe. There is a first aid kit located on the south wall near the Wood Shop door.
The following rules must be followed at all times.
All the same safety rules from the machine shop apply:
- Safety glasses must be worn when soldering or running Volter printers.
- No horseplay in the PCB Lab.
- Don’t do anything distracting to yourself or others while operating equipment.
- Food or drink is allowed when not operating equipment. Wash your hands after soldering or working with solder paste and chemicals.
- Do not attempt to operate machinery in the PCB Lab that you have not been certified on.
- Do not argue with volunteers or shop staff. Contact Justin Johnson if you have issues that need to be resolved.
- Do not operate equipment without a lab supervisor or trained volunteer in the lab with you.
- Reset the space. Make the area you are working in ready for the next person.
- If you see a safety violation inform the person immediately and encourage them to comply with the policies
- Don’t do anything that would require an additional rule to be added to this list.
2. Reset the Space
The Wood Shop has a specific organization to it. Put whatever you use back where it belongs. There is a place for everything and everything has a place. This rule applies to everything in the space. If you use a tool, put it back. If you use a pen, put it back. Throw away your trash and recycling.
Now, we understand that sometimes you need to leave projects out. Maybe you are in the middle of a large project and you need something left overnight. In cases like this, it is okay, but you NEED to make prior arrangements with Nick or Justin.
Please put back the Machinery the way you found it. Clean up chips and any messes you make. NEVER use shop air to clean off yourself or the machines.
Always put any unused materials back on the storage shelf, and throw away unusable scrap.
Always leave the space better than you found it.
3. Be Professional
This commandment has two sides to it. It covers the idea of acting like professional (which Webster’s defines as “exhibiting a courteous, conscientious, and generally businesslike manner in the workplace”). The term also describes the standards of education and training that prepare members of the profession with the particular knowledge and skills necessary to perform their specific role within that profession. Hopefully, you are learning both of these as part of your education at George Fox University. In the Welding Lab we expect you to develop as a courteous, conscientious, and skilled craftsman, understanding the tools and equipment in the Maker Hub and how to use them effectively.
Being a professional has some obvious ramifications in terms of behavior. First, be Christlike. Think of others better than yourselves. Share. If you have been welding for a prolonged time and someone else is waiting for the machine, let them use the machine for a while. This is being a professional.
If you are learning to how to use a machine, and you can't get something to work the way you want - ASK SOMEONE! Learn! Become a professional. Learn the craft. This is an educational space. You might think it will be quick and you can just get it done “your” way and not learn how to do it correctly. Be a Professional and learn the proper way, and then be available to teach others.
One very important, and likely difficult part of being a professional is to correct others when they are not being professional. It is your responsibility to speak up when you see somebody doing something inappropriate. If you see somebody doing something unsafe, not resetting the space, or being unprofessional, the professional thing to do is to remind them of the three commandments and ask them politely to correct their action. This is OUR space, not any individual's. As a group, we expect everyone in the space to keep the space safe, clean, and operable for everyone.
If someone acts disgracefully unprofessional to you in the Machine Shop, you are welcome to bring the issue to Justin or Nick's attention.
Foxtale Certification
Before working with any of the equipment in the PCB Lab you will need to take the general lab quiz as well as the specific quiz for each machine you are trying to use. The enrollment code for all of the quizzes is MakerHub.
Inventory
Click this link to be directed to the internal site for inventory.