Lathe
Make: Monarch
Model: 10EE
Ace: Needed (Makerhub@georgefox.edu).
Location: Machine Shop
Description
A lathe is a machine tool that rotates the work piece on an axis to perform various operations such as cutting, sanding, knurling ,drilling, facing, and turning. It does this with a stationary tool that is applied to the work piece to remove material. The lathe will create an object that is symmetrical about the axis of rotation it was rotated about. It is useful for creating flywheels and other circular parts.
Documentation
Terminology
Insert terminology here
User Manual
Training
Overview
Insert Text
Demonstration
Insert text
General Procedure
Insert text
Safety
Insert text
Certification
Foxtale Quiz
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |
A lathe is a machine tool that rotates the workpiece on its axis to perform various operations such as cutting, sanding, knurling ,drilling, or deformation, facing, turning, with tools that are applied to the workpiece to create an object with symmetry about an axis of rotation.
We have two lathes here at George Fox University and there are some important differences between them, namely how to turn them on and off and change the speed.
The current Ace of the Lathe is Needed (Makerhub@georgefox.edu).
3 commandments
Stuff about the 3 commandments.
Accessories
Any tooling
Documentation
- <figure-inline class="mw-default-size">220x220px</figure-inline>
- <figure-inline class="mw-default-size">220x220px</figure-inline>
Stuff
stuff2
Training
Something in here about the FoxTale course that doesn't exist yet. This video contains specific information for using the lathe in the Maker Hub as well as a basic overview of what will be expected in your live demonstration.
A common difficulty with using these lathes is activation. The images on the right demonstrate the differences between Lathe 1 and Lathe 2, please refer to the video above for more information. Note that the activation lever on Lathe 1 needs to be pulled out before being moved up and down. It also has a neutral position. The lever must be in neutral position for the machine to turn on. If this happens, ensure that the lever is fully in forward or reverse. It is safer to run the machine in forward because the chips will tend to fall down and into the tray rather than fly up and out.
