Oscillating Spindle Sander

Oscillating Spindle Sander

Make: Grizzly Industrial

Model: G1071

Ace: Needed (gdowler@georgefox.edu).

Location: Wood Shop

Description

The Grizzly vertical spindle sander is for sanding curved surfaces. The machine contains a 1HP motor and has 10 different sanding spindles ranging from 1/4" to 4" in diameter. The cast iron table has an opening that allows the spindles to oscillate up and down. The oscillating action will give you a smooth sanded surface. The 4" dust port connects easily to any dust collector. Used to remove material from wood, as well as squaring to create straight pieces.

Here is an example of this piece of equipment being used.

Documentation

Terminology

Insert terminology here

User Manual [G1071_m.pdf] User Manual

Training

Overview

Insert Text

Demonstration

Insert text

General Procedure

Insert text

Safety

There are several hazards you need to be aware of when using a spindle sander.

• Never make contact with the rotating spindle. The sand paper is very course and will cause injury if contact is made.
• The spindle is rotating very fast and can grab your work piece.
• Hold onto material firmly and keep it against the table to help prevent the material from pulling out of your hands. If material catches on the spindle it can starts rotating quickly and create a dangerous situation.

Certification

Foxtale Course

Maintenance

General maintenance

As sanding sleeves are used they will "gum up" with saw dust. If not removed, the saw dust will harden and reduce the life of the sanding sleeve. As needed, a abrasive cleaner should be used on the sleeves.

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Sample	Sample	Sample