Changes

Jump to navigation Jump to search
Line 111: Line 111:  
#When you are removing the support material by hand, it can be a little hot and sharp to begin with. Using a tool of some sort to chip it off is a good way to go, because hands bleed and tools don't :)
 
#When you are removing the support material by hand, it can be a little hot and sharp to begin with. Using a tool of some sort to chip it off is a good way to go, because hands bleed and tools don't :)
 
#When using the dissolvable support bath, do not use your bare hands to put your parts in! The liquid consists of water and Sodium Hydroxide which is a strong base! Use goggles, a lab coat, and the huge thick rubber gloves so that you don't get any on you.
 
#When using the dissolvable support bath, do not use your bare hands to put your parts in! The liquid consists of water and Sodium Hydroxide which is a strong base! Use goggles, a lab coat, and the huge thick rubber gloves so that you don't get any on you.
 +
 +
==Approved Filaments==
 +
*
    
==Certification==
 
==Certification==

Navigation menu