2,442
edits
Changes
Jump to navigation
Jump to search
→Safety
Line 111:
Line 111:
#When you are removing the support material by hand, it can be a little hot and sharp to begin with. Using a tool of some sort to chip it off is a good way to go, because hands bleed and tools don't :)
#When you are removing the support material by hand, it can be a little hot and sharp to begin with. Using a tool of some sort to chip it off is a good way to go, because hands bleed and tools don't :)
#When using the dissolvable support bath, do not use your bare hands to put your parts in! The liquid consists of water and Sodium Hydroxide which is a strong base! Use goggles, a lab coat, and the huge thick rubber gloves so that you don't get any on you.
#When using the dissolvable support bath, do not use your bare hands to put your parts in! The liquid consists of water and Sodium Hydroxide which is a strong base! Use goggles, a lab coat, and the huge thick rubber gloves so that you don't get any on you.
+
+==Approved Filaments==
+*
==Certification==
==Certification==