1,956
edits
Changes
Jump to navigation
Jump to search
Line 45:
Line 45: − + − +
→Operation
The cutting angle of the scroll saw can be changed by doing the following:
The cutting angle of the scroll saw can be changed by doing the following:
1. Release the locking lever by rotating it counter-clockwise.
*1. Release the locking lever by rotating it counter-clockwise.
2. Turn the tilting handle left or right as desired.
*2. Turn the tilting handle left or right as desired.
3. Use the spring loaded indexing pin for common angles.
3. Use the spring loaded indexing pin for common angles.
4. Tighten the locking lever.
4. Tighten the locking lever.