1,962
edits
Changes
Jump to navigation
Jump to search
→Operation
Line 45:
Line 45:
−*2. Turn the tilting handle left or right as desired.+
+
The cutting angle of the scroll saw can be changed by doing the following:
The cutting angle of the scroll saw can be changed by doing the following:
−*1. Release the locking lever by rotating it counter-clockwise.
+*1. Release the locking lever by rotating it counter-clockwise.
+2. Turn the tilting handle left or right as desired.
+3. Use the spring loaded indexing pin for common angles.
3. Use the spring loaded indexing pin for common angles.
+
4. Tighten the locking lever.
4. Tighten the locking lever.