Changes

Jump to navigation Jump to search
Line 95: Line 95:  
<u>Threading the machine</u>
 
<u>Threading the machine</u>
 
* Draw thread from the thread spool and thread the machine by following the directional numbered arrows on the housing of the machine. Make sure the thread is well-seated between the tension discs at the numbered dial and is through the eye of the take-up lever--part 7 in the manual. At the end, thread the needle.
 
* Draw thread from the thread spool and thread the machine by following the directional numbered arrows on the housing of the machine. Make sure the thread is well-seated between the tension discs at the numbered dial and is through the eye of the take-up lever--part 7 in the manual. At the end, thread the needle.
 +
<u>Changing settings</u>
 +
 +
* When altering the stitch length, stitch width, or choosing a different stitch pattern make certain the needle is in the needle-up position.
    
====Demonstration====
 
====Demonstration====
83

edits

Navigation menu