70
edits
Changes
Jump to navigation
Jump to search
Line 95:
Line 95: + + +
→Operation
<u>Threading the machine</u>
<u>Threading the machine</u>
* Draw thread from the thread spool and thread the machine by following the directional numbered arrows on the housing of the machine. Make sure the thread is well-seated between the tension discs at the numbered dial and is through the eye of the take-up lever--part 7 in the manual. At the end, thread the needle.
* Draw thread from the thread spool and thread the machine by following the directional numbered arrows on the housing of the machine. Make sure the thread is well-seated between the tension discs at the numbered dial and is through the eye of the take-up lever--part 7 in the manual. At the end, thread the needle.
<u>Changing settings</u>
* When altering the stitch length, stitch width, or choosing a different stitch pattern make certain the needle is in the needle-up position.
====Demonstration====
====Demonstration====