411
edits
Changes
Jump to navigation
Jump to search
Line 48:
Line 48: + + Line 64:
Line 66: − + − + − + − + − + − + − + Line 76:
Line 78: +
→Operation
* Spool - Holder used for thread.
* Spool - Holder used for thread.
* Bobbin - Cylinder or spindle holder in which thread is wound thread that comes from the bottom
* Presser foot - piece of metal that keeps fabric in place when sewing.
==Training==
==Training==
====Operation====
====Operation====
<u>Wind the bobbin</u>
<u>Winding the bobbin</u>
* Once you picked the type/color of thread spool, first get some of it loose and out and secondly place it on the skinny tub. Then, add the spool cap. the side will depend on the type/ style of thread spool you picked.
* Once you picked the type/color of thread spool, first get some of it loose and out and secondly place it on the large spool holder (skinny tub). Then, add the spool cap. It's side will depend on the type/ style of thread spool you picked.
* As you follow the guide images, put the thread around the metal know. Then slide the thread through one of the holes in the bobbin and place it in the small metal tube that its on the right top f the machine. Slide the bobbin winder shaft over to lock it.
* As you follow the guide images, put the thread around the metal knob (upper thread guide). Then slide the thread through one of the holes in the bobbin and place it in the bobbin winder spindle (small metal tube) that its on the right top of the machine. Slide the bobbin winder shaft over to lock it.
* Hold the thread for couple seconds at the begging as you press the presser foot gently and slow. Once it took off evenly or uniform, you can let go of the thread and go faster. with the presser foot
* Hold the thread for couple seconds at the beginning as you press the presser foot gently and slow. Once it took off evenly or uniform, you can let go of the thread and go faster with the presser foot
* Cut the thread once you are done and place the bobbin unto the machine. the top drop in bobbin is covered by a plastic cover that you can remove by gently pulling the black small square to the right. Drop the bobbin and wrap the thread around a clip is also under the plastic cover. finally, put the cover on.
* Cut the thread once you are done and place the bobbin unto the machine. The top drop in bobbin is covered by a plastic cover that you can remove by gently pulling the hook cover release button . Drop the bobbin and wrap the thread around a clip is also under the plastic cover. finally, put the cover on.
<u>Thread the machine</u>
<u>Threading the machine</u>
* Grab onto the thread from the thread spool and run the thread through the knob and going down then up, following the image guide around and make sure it is catching all parts. At the end thread the needle
* Grab onto the thread from the thread spool and run the thread through the knob and going down then up, following the image guide around and make sure it is catching all parts. At the end thread the needle.
====Demonstration====
====Demonstration====
====General Procedure====
====General Procedure====
# Wind the bobbin and thread the machine
# Pick 2 pieces of fabric and turn them inside out (flip them) because when you sew it you turned it back inside out in order to not see the seams. Line those 2 pieces up.
# Pick 2 pieces of fabric and turn them inside out (flip them) because when you sew it you turned it back inside out in order to not see the seams. Line those 2 pieces up.
# Pick an edge that you will not turned inside out and therefore not sew until the end. Start sewing from that right edge going clockwise direction. You can use the basic stitch since you will not see it anyways.
# Pick an edge that you will not turned inside out and therefore not sew until the end. Start sewing from that right edge going clockwise direction. You can use the basic stitch since you will not see it anyways.