1,956
edits
Changes
Jump to navigation
Jump to search
Line 98:
Line 98: − + − + − + − +
→General Procedure
# To pause a print in the middle of the job, press the knob and it'll pull up a printing menu. There are two options near the bottom, "Stop Print" and "Pause Print". If the print is failing, you definitely want to stop it. If you need to change filament or think you can save the print before it fails anymore, you can pause the print.
# To pause a print in the middle of the job, press the knob and it'll pull up a printing menu. There are two options near the bottom, "Stop Print" and "Pause Print". If the print is failing, you definitely want to stop it. If you need to change filament or think you can save the print before it fails anymore, you can pause the print.
Possible Print Failure Causes:
Possible Print Failure Causes:
# Faillure to adhere to the bed
# Failure of material to adhere to the bed.
# No support around the model
# No support around the model.
# First layer of the print warps
# The first layer of the print warps.
# Brim gets torn and dragged around
# The brim gets torn and dragged around
== Safety ==
== Safety ==