Line 35:
Line 35:
====Terminology====
====Terminology====
−
*[[File:MillRange.png|thumb]]Spindle - The rotating shaft, driven by the motor, that holds the cutting tools.
+
* Spindle - The rotating shaft, driven by the motor, that holds the cutting tools.
* Quill - The part of the vertical milling machine that raises and lowers cutting tools held in the spindle.
* Quill - The part of the vertical milling machine that raises and lowers cutting tools held in the spindle.
* Quill Handle - The long handle on the right side of the machine that raises and lowers the quill.
* Quill Handle - The long handle on the right side of the machine that raises and lowers the quill.
Line 47:
Line 47:
==Training==
==Training==
−
[[File:QuillHandle.png|thumb]]
+
====Overview====
====Overview====
−
[[File:MillOn.png|thumb]]
+
+
+
+
<gallery>
+
File:MillOn.png|Substrates
+
File:MillSpeed.png|dd
+
File:MillRange.png|Probe
+
File:QuillHandle.png|thumb
+
</gallery>
+
====Demonstration====
====Demonstration====
−
[[File:MillSpeed.png|thumb]]
+
For the demonstration, you will face a piece of aluminum stock, drill a hole in the center, ream the hole, and deburr all of the edges. Reference the video below to see what this should look like.
For the demonstration, you will face a piece of aluminum stock, drill a hole in the center, ream the hole, and deburr all of the edges. Reference the video below to see what this should look like.