Changes

# Plug in the Ortery Photo table, if it isn't already, and turn the power switch to on. This will not cause a dramatic change in the table but must be done so the software can recognize the it.  

# Plug in the Ortery Photo table, if it isn't already, and turn the power switch to on. This will not cause a dramatic change in the table but must be done so the software can recognize the it.  

# Turn on the computer and log in using your normal George Fox log in.  

# Turn on the computer and log in using your normal George Fox log in.  

# Open up the Ortery Capture software and log in. The username is Cameraman and the password is Nikond70.

# Open up the Ortery Capture software and log in. The username is Cameraman and the password is Nikond70.  

# Use the provided USB cable to connect the Camera to the computer.

# Use the provided USB cable to connect the Camera to the computer.

## Make sure when doing this, the camera is off while connecting the camera, and that the software is able to recognize the camera.

## Make sure when doing this, the camera is off while connecting the camera, and that the software is able to recognize the camera.

Capturing images of the product:  

Capturing images of the product:  

# In the Ortery software, open up a new capture and the camera settings panel will open up.

# In the Ortery software, open up a new capture and the camera settings panel will open up.

# Customize the camera settings (aperture, shutter speed, etc) as well as the table lighting to achieve the desired appearance.  

# Customize the camera settings (aperture, shutter speed, etc) as well as the table lighting to achieve the desired appearance. The video walks through this. 

# Press capture to take photos.  

# Press capture to take photos.