1,947
edits
Changes
Jump to navigation
Jump to search
Line 207:
Line 207: − + Line 239:
Line 239: − +
→Demonstration
4. Lock the fence by pressing down on the locking handle.
4. Lock the fence by pressing down on the locking handle.
5. Use the blade lift handle on the front of the saw to set the height of the blade approximately 1 tooth above the height of the material by placing the material next to the blade. This limits the exposed blade.
5. Use the blade lift handle on the front of the saw to set the height of the blade approximately 1/8-1/4" above the height of the material by placing the material next to the blade. This limits the exposed blade.
6. Turn on the power switch on the front of the saw and the dust collector. The green light on the saw will flash and turn solid green when the saw is ready.
6. Turn on the power switch on the front of the saw and the dust collector. The green light on the saw will flash and turn solid green when the saw is ready.
20. Power down the saw by pressing the red paddle switch located on the front of the machine.
20. Power down the saw by pressing the red paddle switch located on the front of the machine.
21. Lower the blade below the table using the crank handle on the front of the machine
21. Lower the blade below the table using the crank handle on the front of the machine
==Certification==
==Certification==