473
edits
Changes
Jump to navigation
Jump to search
Line 38:
Line 38: + Line 47:
Line 48: − Insert Text+ + − Insert text+ − ====General Procedure====+ + + + + + + − Insert text+ + − Insert text+ Line 81:
Line 90: − − <br /> − '''⚠ WARNING:''' DO NOT unplug or turn off the printer using the rear cutoff switch for more than a couple hours. This will cause detrimental damage to the print head. However, using the front power button is safe. − − == Documentation == − The Master Guide covers every basic thing about the BN-20. It has instruction on printing, cutting, maintenance, and calibration. Look over this if you are new to the BN-20. − * [http://support.rolanddga.com/Docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/BN-20_USE_EN_R2.pdf Master Guide] − − == Training == − The following is a description of the steps for printing from the BN-20 − − === Design === − The first step is to get your graphics ready for printing. Whether you get your graphics from the internet or deign them in a program similar to Adobe Illustrator, it will need to be imported into Adobe Illustrator for the process described here. These steps could be taken in CorelDRAW as well (refer to [http://support.rolanddga.com/Docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/BN-20_USE_EN_R2.pdf Master Guide]), but this section does not cover that.s − − == Maintenance == − The BN-20 needs to be maintained regularly. If not mainteined regularly, the machine becomes more prone to malfunction in the future. − − === Utility Software === − The BN-20 has utility software in the system tray. It displays ink levels and helps the user do maintenance tasks. − − === Ink === − − ==== Printing Cartridges ==== − The utility software should notify the user when the ink is empty. When it is, remove the empty cartridge, get one of the same color and type (type must be Eco-Sol Max ink), shake the cartridge vigorously, and simply push it into the slot. − − '''WARNING:''' Use only "Eco-Sol Max" ink. Do not use Eco-Sol Max 2 or 3. − − ==== Waste Cartridge ==== − The utility software will notify the user when the waste ink cartridge is full. When this happens, remove the old waste cartridge and push in a new one The cartridge is located on the rear right of the machine). − − '''WARNING:''' Replace the waste ink cartridge <u>when and only when</u> the utility notifies the user it is full.
no edit summary
* Adobe Illustrator - The software used to set up graphics to be printed.
* Adobe Illustrator - The software used to set up graphics to be printed.
* Weeding - Removing the excess vinyl material with the tools found in the drawer below the computer.
* Weeding - Removing the excess vinyl material with the tools found in the drawer below the computer.
* Versawoks - The software that interacts with the printer to perform a print.
* See below for specific machine terminology.
* See below for specific machine terminology.
* [[File:Vinyl Printer Terms.png|none|thumb|866x866px]]
* [[File:Vinyl Printer Terms.png|none|thumb|866x866px]]
====Overview====
====Overview====
Almost any file type can be used as a graphic when using the vinyl printer but they all must be brought into Illustrator to add a cut line. Note that a vector file such as a pdf will work the best. The cut line tells the printer to cut out the image that is being printed so it can be weeded properly before it is applied. There are many ways to create a cut line in Illustrator and it is up to the user to determine which process will be the easiest for their graphic. Once a cut line has been created, the file is saved as an .eps and then opened in Versaworks to finalize any print settings before performing the print. After the print is completed it should be left to dry for 20 minutes before being applied to another object.
====Demonstration====
====Demonstration====
Print out and weed a graphic of choice. If you are indecisive use a George Fox logo from the website.
====General Procedure====
Loading Material:
# The vinyl printer is capable of printing on any type or size of vinyl but matte vinyls will provide the best results. Sticker vinyls can be found on the vinyl cutter or in the cabinet under the computer while heat transfer vinyls can be found in the vinyl printer or in the cabinet to the right of the printer. Scrap pieces can be found in the bin next to the computer and are loaded into the printer just like a roll is.
# Press the secondary power button to turn on the printer.
# The loading process always begins by pushing the loading lever backwards. This opens the media clamps so the vinyl can be slid through the printer.
# The media guides are critical to keeping the vinyl in place while printing and must be adjusted to fit the width of the vinyl. Do so by sliding the left media guide to the edge of the vinyl piece. When doing this make sure the pinch roller is above a grit roller or the printer will NOT work. You may have to play with the piece orientation or width to make this possible.
# Feed the vinyl through the printer from the back of machine so that it passes under the media clamps. The purpose of the media clamps is to keep the edges of the vinyl from interfering with the print head so this is an important piece to remember. Feel free to reference the image below. [[File:Vinyl Clamps.png|none|thumb|463x463px]]
# Finish the loading process by pulling the loading lever forward and making sure the door is closed. If everything is done correctly the printer will move around the material a bit and then sit quietly. If there is beeping then it should be troubleshooted.
Preparing Graphics:
# Versaworks uses .eps files to perform jobs which makes Adobe Illustrator .
==Safety==
==Safety==
* Never turn off the main power supply. The printer must routinely empty the print head to prevent it from clogging
==Certification==
==Certification==
|Sample
|Sample
|}
|}