47
edits
Changes
Jump to navigation
Jump to search
Line 30:
Line 30: − +
→GrabCAD Print
GrabCAD Print is the software that both the Dimension and [[F370 3D Printer|F370]] use, and allows you to easily orient and view the part you want to model. Both printers are web based, which allows you to start the print from the one of the lab's computers.
GrabCAD Print is the software that both the Dimension and [[F370 3D Printer|F370]] use, and allows you to easily orient and view the part you want to model. Both printers are web based, which allows you to start the print from the one of the lab's computers.
On Opening GrabCAD, make sure that you select the printer you want to use for the part you want to print, the volunteers in the lab can help you determine which printer would work best. The menu the the right of the image shows the printer options, make sure you select the correct printer, in this case it is the Dimension. After ensuring you have the software correctly set up, open your file and place it on the build plate, '''''Note: your file has to be in STL format to work with any printing software.''''' The build plate is correctly scaled to the actual build plate, so when sizing up or down you can check the size and placement of the print with the build plate.
On Opening GrabCAD, make sure that you select the printer you want to use for the part you want to print, the volunteers in the lab can help you determine which printer would work best. The menu the the right of the image shows the printer options, make sure you select the correct printer, in this case it is the Dimension. After ensuring you have the software correctly set up, open your file and place it on the build plate, '''''Note: your file has to be in STL format to work with any printing software.''''' The build plate is correctly scaled to the actual build plate, so when sizing up or down you can check the size and placement of the print with the build plate. '''''Note: The following pictures show a single part being printed, during regular lab hours the Dimension is only started when the plate is mostly full to be printed overnight.'''''
[[File:Opening File(D).png|center|1000x1000px]]
[[File:Opening File(D).png|center|1000x1000px]]