Changes

#Make sure the table and floor are clear prior to shearing.

#Make sure the table and floor are clear prior to shearing.

#Mark your piece, place it on the right side of the table, and slide your piece in till your cut line is directly under the blade and against the side guard. Make sure your fingers stay out of the clamp down or you can accidentally crush your fingers if not careful.

#Mark your piece, place it on the right side of the table, and slide your piece in till your cut line is directly under the blade and against the side guard. Make sure your fingers stay out of the clamp down or you can accidentally crush your fingers if not careful.

#With your fingers holding the piece, press down on the pedal with your foot until the shear completely cuts your piece.

#With your fingers holding the piece, press down on the pedal with your foot until the shear completely cuts your piece. Before the blade engages the piece, make sure that your piece if held securely by the clamp down.  

#Collect all of your pieces, and deburr.

#Collect all of your pieces, and deburr.

== Safety ==

== Safety ==

#Never leave anything on the table of the shear.

#Never leave anything on the table of the shear.

#After shearing, use caution in handling your pieces as they are most likely sharp. Make sure you debbur.

#After shearing, use caution in handling your pieces as they are most likely sharp. Make sure you debbur.

== Documentation ==

== Parts of the Machine ==