108
edits
Changes
Jump to navigation
Jump to search
Line 98:
Line 98: +
no edit summary
=== Maintenance ===
=== Maintenance ===
* Dredging: Every few prints the resin tank should be dredged with a scraping tool to search for any hardened resin or loose bits of material, when resin tanks are switched out, and when a print fails. Remove any found bits. Dredging is done by sweeping a scraping tool back and forth across the bottom of the resin tank, essentially mixing up the resin to stir up any loose bits. Take care while dredging to not scrape the tank. See a resin's particular page on the Formlabs website for additional cleaning instruction. If the tank is not cleanable, switch out the resin tank. If the problem persists, it's possible the resin cartridge needs to be switched out as well.
* Dredging: Every few prints the resin tank should be dredged with a scraping tool to search for any hardened resin or loose bits of material, when resin tanks are switched out, and when a print fails. Remove any found bits. Dredging is done by sweeping a scraping tool back and forth across the bottom of the resin tank, essentially mixing up the resin to stir up any loose bits. Take care while dredging to not scrape the tank. See a resin's particular page on the Formlabs website for additional cleaning instruction. If the tank is not cleanable, switch out the resin tank. If the problem persists, it's possible the resin cartridge needs to be switched out as well.
* Alcohol in the Form Wash must be changed once a certain threshold of washed-off resin enters the tank. See the [[Form Wash and Cure]] page for details.
* [https://support.formlabs.com/hc/en-us/categories/115000003904-Form-2 Form 2 Sources and Help]
* [https://support.formlabs.com/hc/en-us/categories/115000003904-Form-2 Form 2 Sources and Help]