Changes

=== Why Pick the Form 2? ===

=== Why Pick the Form 2? ===

The Form 2 is most useful for its ability to print incredibly accurate parts, with layers up to .025mm thick, depending on the resin selected. Due to the Form 2 can only be used to print smaller pieces, and the extra detail also causes the Form 2 to generally be the slowest printer in the lab.  

The Form 2 is most useful for its ability to print incredibly accurate parts, with layers as thin as .025mm thick, depending on the resin selected. Due to the size of the Form 2, it can only be used to print smaller pieces, and the extra detail also causes the Form 2 to generally be the slowest printer in the lab. Unless an exception is made, a model with supports included should be no larger than 30mL worth of resin. If specific material properties are needed for a print, the Form 2 is a good option to look into thanks to the many differing resins available for use. 

=== Choosing a Resin Type ===

=== Choosing a Resin Type ===

## '''When a print fails, the build plate must be cleaned and run through the Wash''' before a new print can be started, as leftover residue from the failed print can cause subsequent prints to also fail. That's bad.

## '''When a print fails, the build plate must be cleaned and run through the Wash''' before a new print can be started, as leftover residue from the failed print can cause subsequent prints to also fail. That's bad.

=== Washing Prints ===

=== Washing and Curing Prints ===

 

=== Curing Prints ===

 

=== Common Errors ===

=== Common Errors ===