108
edits
Changes
Jump to navigation
Jump to search
Line 33:
Line 33: + Line 62:
Line 63: +
→Removing Prints
=== Why Pick the Form 2? ===
=== Why Pick the Form 2? ===
The Form 2 is most useful for its ability to print incredibly accurate parts, with layers up to .025mm thick, depending on the resin selected. Due tosmall size the Form 2 can only be used to print smaller pieces, and the extra detail also causes the Form 2 to generally be the slowest printer in the lab.
=== Choosing a Resin Type ===
=== Choosing a Resin Type ===
## Wash the print in the Form Wash.
## Wash the print in the Form Wash.
## If the print is being cured, only remove support material after it has been run through the Form Cure.
## If the print is being cured, only remove support material after it has been run through the Form Cure.
## Supports should be clipped off, and any leftover support material can be sanded down if desired.
# Failed prints
# Failed prints
## Follow the same process for finished prints for removing.
## Follow the same process for finished prints for removing.