108
edits
Changes
Jump to navigation
Jump to search
Line 34:
Line 34: − + − + + + + + + + + + + +
no edit summary
=== Changing Resin ===
=== Changing Resin ===
# Remove, clean, and replace the build plate.
# Remove, clean, and replace the build plate.
## Pull lever holding build plate in place up, allowing the build plate to be removed.
* The build plate is the large metallic square-shaped block the Form 2 builds onto, held in place at the top of the printer.
## Place the build plate on the holding rack in the Form Wash. Run the build plate through the Wash to remove resin.
## Pull lever holding build plate in place up, allowing the build plate to be removed
## Place the build plate on the holding rack in the Form Wash. Run the build plate through the Wash to remove resin. For the build plate, the Wash should be set to 10 minutes.
## Let the build plate air dry before replacing, secure by flipping lever down.
## Let the build plate air dry before replacing, secure by flipping lever down.
# Remove and replace the resin tank and wiper.
## The resin tank is the translucent, orange, plastic box filled with resin.
## The wiper is the black rod which lays flat in the resin tank and hooks over one edge.
## Firmly pull wiper back until it's out of the slot and loose in the resin tank. Leave the wiper in the resin tank, each tank has its own wiper.
## Firmly pull tank back until it pops loose of the printer, put the appropriate lid on the resin tank, and store with wiper in tank. Be sure to wipe up any resin that spills during the removal process.
## Before inserting the new resin tank, remove its lid and store.
## Slot the new resin tank into place in the printer.
## Slot the new tank's wiper into place.
# Firmly pull wiper back until it's out of its slot and loose in the resin tank. Leave the wiper in the resin tank, each tank has its own wiper.
# Firmly pull wiper back until it's out of its slot and loose in the resin tank. Leave the wiper in the resin tank, each tank has its own wiper.
# Firmly pull tank back until it pops loose of the printer, put the appropriate lid on the resin tank, and store with wiper in tank. Be sure to wipe up any resin that spills during the removal process.
# Firmly pull tank back until it pops loose of the printer, put the appropriate lid on the resin tank, and store with wiper in tank. Be sure to wipe up any resin that spills during the removal process.