42
edits
Changes
Jump to navigation
Jump to search
Line 47:
Line 47: − + −
no edit summary
* Powering on the Printer
* Powering on the Printer
The F370 can be powered on by pressing the large power button next to the touch screen console on the front of the printer. The printer may take up to 15 minutes to boot up, so do this step first if you plan to print soon.
**The F370 can be powered on by pressing the large power button next to the touch screen console on the front of the printer. The printer may take up to 15 minutes to boot up, so do this step first if you plan to print soon.
* Before you can open your part in GrabCAD, make sure your part is in the '''.STL''' format.
* Before you can open your part in GrabCAD, make sure your part is in the '''.STL''' format.
* Acceptable Prints
* Acceptable Prints
** The maximum part size is 14 x 10 x 14 inches, or 35.56 x 25.4 x 35.56 centimeters. Any part that large should be shown to a lab volunteer to discuss options.
** The maximum part size is 14 x 10 x 14 inches, or 35.56 x 25.4 x 35.56 centimeters. Any part that large should be shown to a lab volunteer to discuss options.