42
edits
Changes
Jump to navigation
Jump to search
Line 33:
Line 33: + + + + + + + +
Starting the GrabCAD Workflow
==== Acceptable Prints ====
==== Acceptable Prints ====
==== Using GrabCAD ====
==== Using GrabCAD ====
GrabCAD Print is the software shared by the F370 and Dimension printer. It allows one to easily orient and view the part that needs to be printed. Both printers are web based, which allows one to start the print from the one of the lab's computers.
On Opening GrabCAD, make sure that you select the printer you want to use for the part you want to print; in this case, the F370, which will appear as "f370D30365". The volunteers in the lab can help you determine which printer would work best. The menu the the right of the image shows the printer options, make sure you select the correct printer, in this case it is the Dimension. After ensuring you have the software correctly set up, open your file and place it on the build plate, Note: your file has to be in STL format to work with any printing software. The build plate is correctly scaled to the actual build plate, so when sizing up or down you can check the size and placement of the print with the build plate.
==== Preparing the F370 ====
==== Preparing the F370 ====
==== Touchscreen Operation ====
==== Touchscreen Operation ====