Changes

*'''Entanglement''' – ensure that loose clothing, long hair, or any other dangling/loose items do not become entangled in the machine. Hair that extends below the collar should be tied up.

*'''Entanglement''' – ensure that loose clothing, long hair, or any other dangling/loose items do not become entangled in the machine. Hair that extends below the collar should be tied up.

*'''Eye Injury''' – needles can break if they hit a solid object while sewing. The broken tip can fly off and become lodged in your eye. Wear safety glasses when using the heavy duty sewing machine.

*'''Eye Injury''' – needles can break if they hit a solid object while sewing. The broken tip can fly off and become lodged in your eye. Wear safety glasses when using the heavy duty sewing machine.

*While it is improbable that you use pins with this machine, do not sew over pins. This can break or bend the needle.

*While it is improbable that you will use pins with this machine, do not sew over pins. This can break or bend the needle.

*Ensure the needle you are using is undamaged.

*Ensure the needle you are using is undamaged.

*Make sure the needle is installed correctly.

*Make sure the needle is installed correctly.

*Be very careful to keep loose clothing and hair away from the pulley. If it grabs a loose sleeve, it could break your hand; if it grabs you hair, it could remove a piece your scalp. No dangling necklaces or earrings either! (Don't make me explain this.)

*Be very careful to keep loose clothing and hair away from the pulley. If it grabs a loose sleeve, it could break your hand; if it grabs your hair, it could remove a piece your scalp. No dangling necklaces or earrings either! (Don't make me explain this.)

*For the safety of the machine always remove the bobbin from the machine before using the winding mechanism.

*For the safety of the machine always remove the bobbin from the machine before using the winding mechanism. Also, do not turn the handwheel

*When you finish using the sewing machine, disconnect the power cable from both the machine and the wall outlet/power strip. Coil the power cable neatly on the table.

manually without being certain to hold the thread tails for bobbin and spool to make certain they do not become entangled in the bobbin case.

==Description==

==Description==