83
edits
Changes
Jump to navigation
Jump to search
Line 42:
Line 42: − + − + − *Do not run thick fabrics or many layers of fabric through a standard sewing machine. Use the industrial sewing machine for these applications.
→Safety First
*'''Entanglement''' – ensure that loose clothing, long hair, or any other dangling/loose items do not become entangled in the machine. Hair that extends below the collar should be tied up.
*'''Entanglement''' – ensure that loose clothing, long hair, or any other dangling/loose items do not become entangled in the machine. Hair that extends below the collar should be tied up.
*'''Eye Injury''' – needles can break if they hit a solid object while sewing. The broken tip can fly off and become lodged in your eye. Wear safety glasses when using the sewing machines.
*'''Eye Injury''' – needles can break if they hit a solid object while sewing. The broken tip can fly off and become lodged in your eye. Wear safety glasses when using the sewing machines.
*Do not sew over pins. This can break or bend the needle.
*While it is improbable that you use pins with this machine, do not sew over pins. This can break or bend the needle.
*Ensure the needle you are using is undamaged.
*Ensure the needle you are using is undamaged.
*Make sure the needle is installed correctly.
*Make sure the needle is installed correctly.
*Verify that you are using the correct presser foot. When changing out the presser foot, manually check that the needle’s travel will clear the foot before using the foot pedal.
*Be very careful to keep loose clothing and hair away from the pulley. If it grabs a loose sleeve, it could break your hand; if it grabs you hair, it could remove a piece your scalp. No dangling necklaces or earrings either! (Don't make me explain this.)
*When you finish using the sewing machine, disconnect the power cable from both the machine and the wall outlet/power strip. Coil the power cable neatly on the table.
*When you finish using the sewing machine, disconnect the power cable from both the machine and the wall outlet/power strip. Coil the power cable neatly on the table.