Changes

###Let the build plate air dry before replacing, secure by flipping lever down.

###Let the build plate air dry before replacing, secure by flipping lever down.

##Remove and replace resin tank and wiper.

##Remove and replace resin tank and wiper.

###Firmly pull wiper back until it's out of its slot and loose in the resin tank. Leave the wiper in the resin tank, each tank has its own wiper.

###Firmly pull tank back towards the touch screen until it pops loose of the printer.

###Firmly pull tank back until it pops loose of the printer, put the appropriate lid on the resin tank, and store with wiper in tank.

###Place the tank in the appropriately labeled tank storage container in the cabinet under the printer.

###Before inserting the new resin tank, remove its lid and store.

###Remove the desired tank from the storage container and place the container back in the cabinet.

###Slot the new resin tank into place in the printer.

###Slot the new resin tank into place in the printer by putting it in and sliding it towards the back of the machine.

###Use a scraping tool to dredge bottom of new resin tank for any hardened resin or loose bits of material, remove any found bits.

###Use a scraping tool to dredge bottom of new resin tank for any hardened resin or loose bits of material, remove any found bits.

###Be sure to clean up any resin that spills during this process.

###Be sure to clean up any resin that spills during this process.

##Remove and replace the resin cartridge in the back of the printer.

##Remove and replace the resin cartridge in the back of the printer.