2,442
edits
Changes
Jump to navigation
Jump to search
→Making a Resin Mold for the Injection Molder
Line 106:
Line 106:
* Then, drill out a hole at the top of the mold for the spout where the plastic will be injected into.
* Then, drill out a hole at the top of the mold for the spout where the plastic will be injected into.
* The printed mold will then be press fitted into the cavity but be careful not to crack the mold when press fitting.
* The printed mold will then be press fitted into the cavity but be careful not to crack the mold when press fitting.
+
+[[File:Resin Mold 1.jpg|300px|thumb|left]]
+[[File:Resin Mold 2.jpg|300px|thumb|center]]
+[[File:Resin Mold 3.jpg|300px|thumb|right]]
==Safety==
==Safety==