2,297
edits
Changes
Jump to navigation
Jump to search
Line 46:
Line 46: + + + + + + + + + + + + + +
→Documentation
====Terminology====
====Terminology====
'''Annealing''' - heating a piece of metal to make it more malleable and remove internal stresses.
'''Quenching''' - rapidly cooling a metal in order to obtain certain material properties.
'''Punching''' - the act of mechanically creating a hole in the coin by hammering the punch through the die.
'''Punching''' - the act of mechanically creating a hole in the coin by hammering the punch through the die.
'''Die''' - a device for cutting or molding metal into a particular shape.
'''Die''' - a device for cutting or molding metal into a particular shape.
'''Deburring''' - to smooth a rough/sharp edge on a part by removing the burr that was created by a punching/cutting/machining action.
'''Cold Forming''' - a forging technique used to shape metals at near room temperature.
'''Folding''' - changing the shape of the coin from a flat disk into a hollow cylinder.
'''Stretching''' - the act of increasing (stretching) the coin ring's diameter.
'''Reducing''' - the act of decreasing (reducing) the coin ring's diameter.
User Manual (You can get one for $20 from Jason's Works)
User Manual (You can get one for $20 from Jason's Works)