124
edits
Changes
Jump to navigation
Jump to search
Line 29:
Line 29: + + + + + + + + Line 93:
Line 101: − − == Safety == − *Laser cutting or engraving of many materials can create hazardous fumes. These fumes may be dangerous to breathe and can damage the FabLight. Consult Manufacturer’s Safety Data Sheets (MSDS) for all materials before laser cutting. The user of the FabLight is responsible for exhaust ventilation and removing cutting fumes from the working area. Before operating the FabLight, make sure that the exhaust system is working properly. − *There are often sharp edges left on the material from the cutting process. Be careful handling a fresh cut piece and use the deburring tools to remove any sharp edges. − *On a similar note a fresh cut piece is usually hot so check the temperature with the back of your hand before picking it up. − *Make sure to use tabs to prevent collision damage with the cutting head. − *Before opening any covers, turn off the machine power and remove the key to make sure no cutting operations will happen while you are working inside the the laser cutter.
no edit summary
__TOC__
__TOC__
==Safety First==
[[File:Safety First HD2.png|left|150px]]
Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
*Laser cutting or engraving of many materials can create hazardous fumes. These fumes may be dangerous to breathe and can damage the FabLight. Consult Manufacturer’s Safety Data Sheets (MSDS) for all materials before laser cutting. The user of the FabLight is responsible for exhaust ventilation and removing cutting fumes from the working area. Before operating the FabLight, make sure that the exhaust system is working properly.
*There are often sharp edges left on the material from the cutting process. Be careful handling a fresh cut piece and use the deburring tools to remove any sharp edges.
*On a similar note a fresh cut piece is usually hot so check the temperature with the back of your hand before picking it up.
*Make sure to use tabs to prevent collision damage with the cutting head.
*Before opening any covers, turn off the machine power and remove the key to make sure no cutting operations will happen while you are working inside the the laser cutter.
==Description==
==Description==
# Once the cut is completed wait a minute or so to let fumes dissipate and the material to cool.
# Once the cut is completed wait a minute or so to let fumes dissipate and the material to cool.
# Remove the material from the machine using the door on the front.
# Remove the material from the machine using the door on the front.
==Cut List==
==Cut List==