Changes

* Once you picked the type/color of thread spool, first get some of it loose and out and secondly place it on the large spool holder (skinny tub). Then, add the spool cap. It's side will depend on the type/ style of thread spool you picked.

* Once you picked the type/color of thread spool, first get some of it loose and out and secondly place it on the large spool holder (skinny tub). Then, add the spool cap. It's side will depend on the type/ style of thread spool you picked.

* As you follow the guide images, put the thread around the metal knob (upper thread guide). Then slide the thread through one of the holes in the bobbin and place it in the bobbin winder spindle (small metal tube) that its on the right top of the machine. Slide the bobbin winder shaft over to lock it.  

* As you follow the guide images, put the thread around the metal knob (upper thread guide). Then slide the thread through one of the holes in the bobbin and place it in the bobbin winder spindle (small metal tube) that its on the right top of the machine. Slide the bobbin winder shaft over to lock it.  

* Hold the thread for couple seconds at the beginning as you press the presser foot gently and slow. Once it took off evenly or uniform, you can let go of the thread and go faster with the presser foot

* Hold the thread for couple seconds at the beginning as you press the foot pedal gently and slowly. Once it becomes even or uniform, you can let go of the thread and go faster with the foot pedal.

* Cut the thread once you are done and place the bobbin unto the machine. The top drop in bobbin is covered by a plastic cover that you can remove by gently pulling the hook cover release button . Drop the bobbin and wrap the thread around a clip is also under the plastic cover. finally, put the cover on.

* Cut the thread once you are done and place the bobbin in the bobbin case. The drop in bobbin is covered by a plastic cover that you can remove by gently pulling the hook cover release button. Drop the bobbin and wrap the thread around a the clip under the plastic cover. Then, put the cover on.

<u>Threading the machine</u>

<u>Threading the machine</u>

* Grab onto the thread from the thread spool and run the thread through the knob and going down then up, following the image guide around and make sure it is catching all parts. At the end thread the needle.

* Grab onto the thread from the thread spool and run the thread through the knob and going down then up, following the image guide around and make sure it is catching all parts. At the end thread the needle.

====Demonstration====

====Demonstration====