Changes

  |Is tv=True

  |Is tv=True

  |Has name={{PAGENAME}}

  |Has name={{PAGENAME}}

  |Has icon=File:Triangle complete.png

  |Has icon=File:Chimes 29.png

  |Has image=File:Chimes 29.png

  |Has image=File:Triangle complete.png

  |Has description=Finished Windchimes

  |Has description=Finished Triangle

  |Uses equipment=Laser Cutter

  |Uses equipment=Hand Bender

  |Uses software=Solidworks

  |Uses software=Solidworks

<br>

<br>

<br>

<br>

<strong>Step 7:</strong> Next we are going to create the center circle that will hit against the chimes. Normal to the top plane and start a new sketch with a circle centered at the origin. This one will be smaller with a diameter of 1 in

<strong>Step 7:</strong> Next we are going to create the center circle that will hit against the chimes. Right click on Top plane in the right hand side bar and "Normal" to the top plane and start a new sketch with a circle centered at the origin. This one will be smaller with a diameter of 1 in

[[File:Chimes 13.png|1400px|none]]

[[File:Chimes 13.png|1400px|none]]

First we are going to tie the hanging string. Using a single piece, thread the string through the four quadrant holes, tying the first one and the last one. It should look about like this:  

First we are going to tie the hanging string. Using a single piece, thread the string through the four quadrant holes, tying the first one and the last one. It should look about like this:  

[[File:Chimes 27.png|750px|none]]

[[File:Chimes 27.png|600px|none]]

<br>

<br>

In this TV I used a single thread and wove it through the holes and chimes. Then I hung it on my hook so I could even out the hanging lengths simply by pulling the string.  

In this TV I used a single thread and wove it through the holes and chimes. Then I hung it on my hook so I could even out the hanging lengths simply by pulling the string.  

[[File:Chimes 28.png|750px|none]]

[[File:Chimes 28.png|600px|none]]

<br>

<br>

Pull the string through the center of the main holder and tie it to the hook at a height that the center disc will bang on the chimes.  

Pull the string through the center of the main holder and tie it to the hook at a height that the center disc will bang on the chimes.  

[[File:Chimes 29.png|750px|none]]

[[File:Chimes 29.png|600px|none]]